Some Technical details of fiber laser cutting machine
1.Can the power be increased easily after shipping ie add a module?
It is IPG laser source, for IPG laser source, the laser increasing is really slowly than other brands, no need to add one module, i confirme with IPG engineer.
2.What is the max cutting speed before adding an absolute position to 90 degree corners?
It depends on different material and thickness
if 6mm aluminum,the maximum cutting speed is about 2-3000mm/minute
if higher, then can not cut it off
if lower,then the corner will be burned.
3.The nesting function is in the control system?
Yes, you can do this nesting work in the control system.
4.Do your slat just pull out or do several thing have to be taken apart.
Just pull out, no need do other jobs,no screws.
5.Things go wrong and the machine looses the ability to cut. Can your laser detect when the material is no longer cutting.
Yes,the laser can detect.
In the list, i also show you, our machine with the alarm system.
If there is any small problem of the machine, the alarm system will warning, and the machine can not working, shows notification in the control software, and you can check it, and change the small problems.
If you want to know more details of our cutting machine, please feel free to contact us.
Contact person: Miss Anne
WhatsApp/Wechat: +86 151 6980 1650
Skype: Anne Sun
e-mail: sale12@ruijielaser.cc
Post time: Dec-17-2018