Daily Problem of Fiber Laser Cutting Machine?
When use the fiber laser cutting machine in daily life, there are many problem you will meet as follows:
A. No auxiliary gas output
The reason is?
1. Insufficien air pressure
2. Wrong the gas channel
3. The solenoid valve is damage, or no control voltage output.
How to solve it?
1. Check the gas line pressure
2. Check air channels is correct in the process parameters
3. Check the solenoid valve,and associated circuitry;
B. Abnormal sound for axis running when metal fiber laser cutting machine working
The reason is?
1. No lubricating oil of axis motion components
2. The moving parts have to interfere with the fixed compensation items;
The you can do as follows:
1. Add the oil, Check running path security of the moving parts running security.
C. No laser or laser power shortage
The reason is?
1. NC signal is not sent
2. lens is dirty or damaged
3. The nozzle is damaged or blocked
4. The optical path is incorrect
5. The laser alarms
Then you have to do as follows:
1. Check the connection between CNC laser machine console
2. Check the protective lens
3. Replace the nozzle
4. Adjust the laser path
5. May water cooling machine temperature is too low, until the temperature reaches the requirement to restart the fiber laser cutting machine
Hi friends, thanks for your reading. Hope this article can help you.
If you want to get more information, welcome to leave message on our website, or write e-mail to: sale12@ruijielaser.cc Miss Anne. 
Thanks for your precious time
Have a nice day.
Post time: Dec-28-2018